Construction steps of perforated gypsum board sound-absorbing board ceiling
Oct 10, 2024
Leave a message
1. Measure the room size, determine the elevation and shape of the ceiling according to the design requirements, and pop up the ceiling installation ink line.
2. Install the ceiling keel along the ink line to ensure that the horizontal and vertical degrees of the keel meet the requirements.
3. Cut the perforated gypsum board sound-absorbing board into a suitable size according to the design requirements, apply a small amount of glue on the four corners, and then stick it on the keel.
4. Use special screws to fix the gypsum board to the keel, ensuring that each gypsum board is firmly fixed.
5. Fill the gaps between the gypsum boards with filling materials such as mineral wool and glass fiber to improve the sound insulation effect.
6. Apply putty, paint and other decorative materials on the surface of the gypsum board to complete the decoration of the ceiling.
7. Check whether the ceiling installation meets the requirements and make adjustments if necessary.
Send Inquiry




